#TP1001 1/64 Green 3-Point Hitch
Stock #TP1001 - metal, attaches to rear of tractor with super glue, recommended method, in up or down position. Mounting instructions included for making hitch movable but recommended only for experienced customizers and hitch will always be in down position when implement is attached. Made by Moore’s Farm Toys, recommended for 14 & up. (Tractors sold separately).
TO MOUNT HITCH: Side arms slide onto rear axle of tractor. To fit hitch to tractor, cut center linkage bar with scissors until hitch is in desired position. Cut only a little at a time to avoid cutting too much. Pinch side arms to snug them to axle. Angle upward for raised position or downward for lowered position. Pull back and apply a small amount of super glue to the axle and push hitch back into position. Hold in place for a minute or two then allow to dry for 10-15 minutes.